進口德國IFM易福門AS-i Safety at Work 模塊
如果您對該產品感興趣的話,可以
產品名稱: 進口德國IFM易福門AS-i Safety at Work 模塊
產品型號:
產品展商: IFM
產品文檔: 無相關文檔
簡單介紹
進口德國IFM易福門AS-i Safety at Work 模塊
2 個安全安全數字輸入和 2 個標準輸出
僅使用一個 As-i 地址，連接 2 個帶有 OSSD 輸出的安全電感式傳感器或光柵
通過 EN 62061 / SIL2 和 EN ISO 13849-1 / PL d 認證
**靈活的快速安裝The modules can be addressed either without voltage
進口德國IFM易福門AS-i Safety at Work 模塊
進口德國IFM易福門AS-i Safety at Work 模塊
的詳細介紹
進口德國IFM易福門AS-i Safety at Work 模塊
聯系人;劉*
企業QQ:1921967640
電話：028-84634436-8003
傳真：
手機：15388264473（微信）
郵箱：15388264473.163.com
2 個安全安全數字輸入和 2 個標準輸出
僅使用一個 As-i 地址，For components without AS-Interface
So, 2-channel inductive sensors with electronic OSSD outputs (e.g. GG712S)
or light grids up to performance level d to EN 13849-1 can be connected to
a single AS-i address using a 4-wire standard connection cable.
Two integrated outputs ensure the connection of two actuators, such as
signal lamps or relays.連接 2 個帶有 OSSD 輸出的安全電感式傳感器或光柵
通過 EN 62061 / SIL2 和 EN ISO 13849-1 / PL d 認證
**靈活的快速安裝The modules can be addressed either without voltage
before mounting or when mounted and wired via the
addressing socket. Only the AC1154 addressing unit
plus the E70213 addressing cable are required.
模塊直接從 AS 接口供電安全輸入模塊可令因此，The safe input module allows safety-related components without integrated
AS-Interface to be connected to the AS-i Safety at Work system.
The safe sensors and the outputs are completely powered by AS-i.通過各自分別的兩個自檢半導體輸出
進口德國IFM易福門AS-i Safety at Work 模塊
